Non-Woven Wipers

Made of 100% filament rayon, the Bemcot M3 wiper is extremely absorbent. This wiper is nonwoven and heat-resistant which serves well for cleaning high temperature process equipment. The Bemcot M3 is soft and low-linting, producing minimal residue.

ITW Texwipe TX1040 PolySat is a pre-wetted cleanroom wiper constructed of a 100% melt-blown polypropylene material - the 0.2 μm filtered, 70% isopropyl alcohol/30% deionized water solution offers a wider range of applications. While offering an extremely low particle release and fiber levels, these wipers are able to prevent contamination in the most important places within the cleanroom. Optimized for general wiping and spill control within critical environments with its high absorbency features.

                                    TX1040 Technical Spec Sheet

ITW Texwipe TX1041 TechniSat is a pre-wetted cleanroom wiper constructed of a 45% cellulose/ 55% polyester blend of material - the 70% isopropyl alcohol solution offers a wider range of applications. The wipers' unique blend offers the cleanliness of polyester, a moderate particle release, with the absorbent characteristic of cellulose. As a pre-wetted wiper, all the steps involving the filtering, diluting, and mixing alcohols are bypassed. The TechniSat is ideal for wiping down production and laboratory equipment. Optimized for general wiping and spill control within critical environments with its high absorbency features.

                                    TX1041 Technical Spec Sheet

ITW Texwipe TX1045 TechniSat is a pre-wetted cleanroom wiper constructed of a 45% cellulose/ 55% polyester blend of material - the 70% isopropyl alcohol solution offers a wider range of applications. The wipers' unique blend offers the cleanliness of polyester, a moderate particle release, with the absorbent characteristic of cellulose. As a pre-wetted wiper, all the steps involving the filtering, diluting, and mixing alcohols are bypassed. The TechniSat is ideal for wiping down production and laboratory equipment. Optimized for general wiping and spill control within critical environments with its high absorbency features.

                                    TX1045 Technical Spec Sheet

Due to high product demand from the impact of COVID-19, this product has a longer lead time. We are diligently working to obtain more product, and we are also able to offer you similar alternative products for use. Check out our Alternative Products page to see available items.

The expected wait time for this product is up to 10 weeks

ITW Texwipe TX1048 TechniSat is a pre-wetted cleanroom wiper constructed of a 45% cellulose/ 55% polyester blend of material - the 6% isopropyl alcohol solution offers a wider range of applications. The wipers' unique blend offers the cleanliness of polyester, a moderate particle release, with the absorbent characteristic of cellulose. As a pre-wetted wiper, all the steps involving the filtering, diluting, and mixing alcohols are bypassed. The TechniSat is ideal for wiping down production and laboratory equipment. Optimized for general wiping and spill control within critical environments with its high absorbency features.

                                    TX1048 Technical Spec Sheet

ITW Texwipe TX1051 PolySat is a pre-wetted cleanroom wiper constructed of a 100% melt-blown polypropylene material - the 0.2 μm filtered, 70% isopropyl alcohol/30% deionized water solution offers a wider range of applications. While offering an extremely low particle release and fiber levels, these wipers are able to prevent contamination in the most important places within the cleanroom. Optimized for general wiping and spill control within critical environments with its high absorbency features.

                                    TX1051 Technical Spec Sheet

ITW Texwipe TX1065 TechniSat is a pre-wetted cleanroom wiper constructed of a 45% cellulose/ 55% polyester blend of material - the 70% isopropyl alcohol solution offers a wider range of applications. The wipers' unique blend offers the cleanliness of polyester, a moderate particle release, with the absorbent characteristic of cellulose. As a pre-wetted wiper, all the steps involving the filtering, diluting, and mixing alcohols are bypassed. The TechniSat is ideal for wiping down production and laboratory equipment. Optimized for general wiping and spill control within critical environments with its high absorbency features.

                                    TX1065 Technical Spec Sheet

ITW Texwipe TX1067 TechniSat is a pre-wetted cleanroom wiper constructed of a 45% cellulose/ 55% polyester blend of material - the 70% isopropyl alcohol solution offers a wider range of applications. The wipers' unique blend offers the cleanliness of polyester, a moderate particle release, with the absorbent characteristic of cellulose. As a pre-wetted wiper, all the steps involving the filtering, diluting, and mixing alcohols are bypassed. The TechniSat is ideal for wiping down production and laboratory equipment. Optimized for general wiping and spill control within critical environments with its high absorbency features.

                                    TX1067 Technical Spec Sheet

ITW Texwipe TX1109 TechniCloth II is a dry cleanroom wiper constructed of a 45% cellulose/ 55% polyester blend of material. The wipers' unique blend offers the cleanliness of polyester, a moderate particle release, with the absorbent characteristic of cellulose. The TechniCloth II is ideal for wiping down production and laboratory equipment. Optimized for general wiping and spill control within critical environments with its high absorbency features.

                                    TX1109 Technical Spec Sheet

ITW Texwipe TX1112 TechniCloth II is a dry cleanroom wiper constructed of a 45% cellulose/ 55% polyester blend of material. The wipers' unique blend offers the cleanliness of polyester, a moderate particle release, with the absorbent characteristic of cellulose. The TechniCloth II is ideal for wiping down production and laboratory equipment. Optimized for general wiping and spill control within critical environments with its high absorbency features.

                                    TX1112 Technical Spec Sheet

ITW Texwipe TX1118 TechniCloth II is a dry cleanroom wiper constructed of a 45% cellulose/ 55% polyester blend of material. The wipers' unique blend offers the cleanliness of polyester, a moderate particle release, with the absorbent characteristic of cellulose. The TechniCloth II is ideal for wiping down production and laboratory equipment. Optimized for general wiping and spill control within critical environments with its high absorbency features.

                                    TX1118 Technical Spec Sheet

ITW Texwipe TX2009 BetaWipe is a dry composite cleanroom wiper constructed of a 45% cellulose/ 55% polyester blend of material. The wipers' unique sandwich structure and blend offers the cleanliness of polyester, a moderate particle release, with the absorbent characteristic of cellulose. Designed for the removal of acids, etchants and chemical spills in controlled environments. Ideal for polishing and cleaning delicate instruments and optimized for general wiping and spill control within critical environments with its high absorbency features.

                                    TX2009 Technical Spec Sheet

ITW Texwipe TX3210 SterileWipe HS II is a dry wiper constructed of a 45% cellulose/ 55% polyester blend of material. The wipers' unique blend offers the cleanliness of polyester, a moderate particle release, with the absorbent characteristic of cellulose.  The SterileWipe HS II is ideal for wiping down production and laboratory equipment. Optimized for general wiping and spill control within critical environments with its high absorbency features.

                                    TX3210 Technical Spec Sheet

ITW Texwipe TX3213 PolySat is a sterile pre-wetted cleanroom wiper constructed of a 100% melt-blown polypropylene material - the 0.2 μm filtered, 70% isopropyl alcohol/30% deionized water solution offers a wider range of applications. While offering an extremely low particle release and fiber levels, these wipers are able to prevent contamination in the most important places within the cleanroom. Optimized for general wiping and spill control within critical environments with its high absorbency features.

                                    TX3213 Technical Spec Sheet

Due to high product demand from the impact of COVID-19, this product has a longer lead time. We are diligently working to obtain more product, and we are also able to offer you similar alternative products for use. Check out our Alternative Products page to see available items.